Custom switched-mode power supply

Model

TP128A 95W

95W 24Vdc high peak coffee dispenser SMPS IEC/EN 60335-2-75

95W power supply used in a professional coffee dispenser. Conforms to 60335-2-75 safety requirements.

Compliance
Discuss this design View specifications
Open-frame 95W high-peak power supply for vending machines

Key properties

At a glance

Nominal output power
95W
Peak output power
168W (35 sec.) / 300W (5 sec.)
Single output voltage
+24Vdc
Model reference
TPSF-95-1-A
Application
Vending machine
Input voltage
115 and/or 230 Vac
Construction
Open frame
Compliance
CE · UL

Datasheet

Technical specifications

Overview 5
  • 95W power supply
  • Able to deliver 3 times the nominal output power
  • Due to a Class 2 certification the user can adjust all parts of the low voltage circuitry without any legislative matters
  • AC in voltage monitor output signal
  • Custom made
Application 3
  • Professional coffee dispensers
  • High peak power demands due to inrush currents of DC motors, valves and relays
  • Low standby power
Input 3
Jumper selectable input voltage range
90Vac - 135Vac; 190Vac - 264Vac
Leakage current
1 mA RMS max.
Efficiency
> 85%
Output 4
Nominal output power
95W
Peak output power
168W (35 sec.); 300W (5 sec.)
Single output voltage
+24Vdc
60950-1 LPS / UL 1310 Class 2 (output limited to 100VA for max 5 seconds)
Protections 5
  • Under / overvoltage protection
  • Overload / short circuit protection
  • Time related output power / overcurrent protection
  • Automatic restart by removing the AC-input for at least 2 sec.
  • Microprocessor controlled protections
Certificates 2
  • CE markedUL certified
Safety & EMC 14
  • IEC/EN/UL 60335-1IEC/EN 60335-2-75IEC/EN/UL 60950-1 LPS
  • EN 55014IEC/EN 61000-3-2IEC/EN 61000-3-3
  • IEC/EN 61000-4-2IEC/EN 61000-4-3IEC/EN 61000-4-4
  • IEC/EN 61000-4-5IEC/EN 61000-4-6IEC/EN 61000-4-11
  • IEC/EN 61000-6-2IEC/EN 61000-6-3
Cooling 1
  • Limited air convection
Construction 1
  • The power supply has an open frame construction with one heatsink. The unit will be mounted in the customer's U-bracket.
Connections 3
Input
3 pins TYCO/AMP connector
115/230V
2 pins JST connector
Output
10 pins Molex connector
Dimensions & weight 2
Dimensions (L x W x H)
116 x 82 x 42 mm4.5 x 3.2 x 1.7 inch
Weight
0.3 kg

Total Power Europe · TP128A · totalpower.nl

Built to your specification

Need a variant of the TP128A?

Every Total Power supply is engineered around a client's electrical, mechanical and certification requirements. Tell us your target and we design to it.

Discuss your project