New

Custom switched-mode power supply

Model

TP175A 21 / 80 W

21/80 W UVC lamp power supply with automatic lamp-type detection

Custom-made power supply that drives both 21 W and 80 W UVC lamps from a single design. It recognises which lamp type is connected on its own, so one supply serves different lamp configurations.

Discuss this design View specifications
Open-frame 21/80 W power supply for UVC lamps

Key properties

At a glance

Nominal output power
21 / 80 W
Nominal output current
800 mA
Model reference
TPHB-80-1-A
Application
Lighting
Input voltage
230 Vac only
Construction
Open frame

Datasheet

Technical specifications

Overview 4
  • Power supply for 21 W and 80 W UVC lamps
  • Serial data output with converter and lamp status
  • Automatic lamp-type detection
  • Custom made
Application 1
  • UVC lamps
Input 3
Input voltage range
190 - 264 Vac
Leakage current
0.5 mA RMS max.
Efficiency
> 83% (21 W lamp) / > 89% (80 W lamp)
Output 2
Nominal output power
21 W / 80 W (lamp-dependent)
Nominal output current
800 mA
Protections 9
  • Under / overvoltage protection
  • Automatic fault recovery (hiccup restart) functionality
  • Automatic latch-off functionality
  • Microprocessor controlled protections
  • AC input undervoltage protection
  • Overcurrent protection
  • Short-circuit and open-circuit protection
  • No-lamp detection
  • End-of-lamp-life protection
Safety & EMC 15
  • IEC/EN/UL 60335-1IEC 61347-2-3IEC/EN/UL 62368-1
  • EN 55014-1EN 61000-3-2EN 61000-3-3
  • IEC 61000-4-2IEC 61000-4-3IEC 61000-4-4
  • IEC 61000-4-5IEC 61000-4-6IEC 61000-4-8
  • IEC 61000-4-11EN 61000-6-1EN 61000-6-3
Cooling 1
  • Limited air convection
Construction 1
  • Open frame
Connections 6
Input
AC mains, 3-pin connector
Safety switch (EN 61058-1)
JST B2P-VH
Lamp supply
JST B3P-VH
Lamp-on indication
2-pin friction-lock header
Programming / I/O
6-pin header
6.3 mm tab
Dimensions & weight 2
Dimensions (L x W x H)
156 x 39 x 27 mm6.1 x 1.5 x 1.1 inch
Weight
0.12 kg

Total Power Europe · TP175A · totalpower.nl

Built to your specification

Need a variant of the TP175A?

Every Total Power supply is engineered around a client's electrical, mechanical and certification requirements. Tell us your target and we design to it.

Discuss your project