300W (Watt) Power Factor Corrected rackmount power supply used for a storage server. This PSU provides a stand by mode and N+1 redundancy with voltage down slope current sharing.

Back to search results

Power Supply Application:

This custom made power supply is designed to supply the 37Vdc BUS voltage within a professional storage server system. The application operates 24/7 and needs a high reliability. The system is built up with three parallel running power supplies. It is possible to plug in/out one PSU at a time, without affecting the performance of the 37Vdc distribution bus.

Another specific requirement for this application is the capability of delivering high peak power to the different DC-DC modules and motors, which are connected to the 37Vdc distribution bus.

Model description:

The power supply converter principle is based on the single-ended feed-forward principle. This cost effective topology provides a high level of reliability, a good efficiency and a compact size. The unit is power factor corrected resulting in a sine wave input current with minimal distortion and an universal wide input range.

System power management and thermal performance is controlled by means of four different status lines and an open collector output, which sets the speed level of the integrated system fan.




Product Inquiries

Power Supply Highlights:

  • 85 – 264 Vac rated universal input range.
  • Active Power Factor Correction (PFC) circuitry.
  • Enlarged immunity against AC mains power dips and – interrupts.
  • Stand by mode and REMOTE on/off control
  • Output fully protected against overload- and short circuit conditions.
  • Protection against thermal overload conditions.
  • Integrated Power- and thermal system management with LED indication.
  • Down slope output voltage characteristic providing accurate current sharing.
  • Featuring N+1 redundancy.
  • High efficiency and compact size.
  • Full compliance to international EMI / RFI standards.
  • 100% final test and burn-in.
  • UL , CSA, IEC and CE marked.

Mechanical construction:

The rackmount PSU is built in a closed metal housing and mounted on a tray with an integrated radial fan, which provides cooling for the power supply and the system.

Dimensions:

PSU – 240 × 140 × 43 mm

Tray – 460 × 143 × 46 mm

Get this page in PDF-format for easy printing.