30W (Watt) Power supply used in a professional security surveillance system (CCTV). The PSU has 7 outputs, including 3 independent self recovering overload protected outputs.

Back to search results

Power Supply Application:

This custom made switched mode power supply is designed to supply the electronics of a professional security surveillance system (CCTV). In order to perform to the highest possible level of reliability and to resist external overload or immunity, all the connected outputs are protected to a maximum degree.

Model Description:

Due to the special nature of the application operation, the regulated power supply generates very low ripple and noise. The PSU has 7 outputs:

  • Three low loss short circuit protected main outputs (output 1,2 and 3). These outputs are used to supply the motherboard of the system.
  • Output 4, 5 and 6 are used to feed the electronics of several different sensors and actuators at distances up to 100 meters.
  • Output 7 is used as a separate output to supply the customer’s system fan.

For immunity reasons, galvanic isolation exists between outputs 1, 2, 3 and outputs 4, 5, 6 and 7. A special circuitry is added to shut down outputs 4, 5 or 6 in case of an overload. After removal of the overload, these outputs will re-appear automatically. Any individual short circuited output does not affect the performance of the other outputs.

Product Inquiries

Power Supply Highlights:

  • 180 – 264 Vac input voltage.
  • Two galvanic isolated output returns.
  • 3 outputs (+5V, -5V, +12V) at return 1
  • 4 outputs (+12V and three times +11.5V) at return 2
  • Three independent low loss self recovering
  • galvanic isolated overload protected outputs.
  • Very low EMC emission.
  • All outputs are fully protected against overload and short circuit conditions.
  • 10 mSec power fail warning at worst load conditions for backup purposes.
  • Safety, CE
  • Immunity level
  • Very long lifetime

Mechanical construction:

The Power Supply has an open frame construction. Cooling of the PSU is accomplished by forced air convection, which is provided by the system fan.
During a breakdown of the fan, the power supply can still provide a 100% load situation. Two flying lead connectors provide an easy connection to the main board of the surveillance system.

Dimensions:

PCB: 170 × 76 × 35 mm

Get this page in PDF-format for easy printing.